For one plumber in Glasgow

Own plumberinglasgow.co.uk and this website

  • The domain plumberinglasgow.co.uk
  • A search report: what people in Glasgow type for this trade each month
  • This website, with your own job photos in place of ours
  • Your Google Business Profile set up
  • 2 weeks of Google Ads management free (you only pay Google for the clicks)

Message Matthew at BetterWays, who own the domain.

See the search report for Glasgow

Glasgow and the towns around it

Get a free quote

Burst and frozen pipes

Burst pipe and frozen pipe repairs in Glasgow

If a pipe has burst, turn off the stop tap, switch off the boiler and immersion, and open the cold taps to drain the system. If a pipe is frozen but not split, warm it gently and never use a flame. We repair split pipes, replace damaged sections and can renew old lead or iron pipework.

Close up of a soldered copper pipe tee joint against a dark background
Photo for illustration

You need this when

  • Water spraying or dripping from a pipe or joint
  • No water from the cold tap in a frost, but other taps work
  • A bulge or split in a copper or plastic pipe
  • Water in the loft, under the sink or behind a bath panel after a thaw
  • Old grey lead pipe near your stop tap
  • Banging or knocking pipes that have started to drip

Why pipes freeze and burst in Glasgow

Glasgow is mild for Scotland, but it still freezes. The Met Office records about 46 days of air frost a year at Glasgow Bishopton, with around 10 in each of December and January. December 2010 was the UK's coldest December in records going back to 1884, and many Glasgow homes remember the burst pipes that followed.

Water expands as it freezes. The ice itself often does the damage, but the leak only shows when it thaws. The pipes most at risk are in unheated lofts, on outside walls, in bay windows, under suspended timber floors, in garages and on outside taps. Top floor tenement flats with a cold roof space above, and empty flats left with the heating off, are classic cases.

What Scottish Water advises

Scottish Water's winter advice is clear. If a pipe freezes, turn off the stop valve and open the cold taps, but never the hot taps if you have a hot water cylinder, because the cylinder may collapse if the pipes leading to it are frozen. Never try to thaw pipes by turning on the boiler or immersion heater, and never use a direct flame. Gently heat the frozen section with a heated cloth if it is safe to do so.

If a pipe bursts, turn off the stop valve, switch off the immersion heater and boiler, let any solid fuel fire die down and open all the taps to drain the system. Refill the hot water system before you relight the boiler. Read the full advice on Scottish Water's frozen and burst pipes page.

Old lead and iron pipes

Many Glasgow tenements and pre-war houses still have old supply pipes. Scottish Water says homes built before 1970 have a higher chance of lead pipework, and that lead service pipes were phased out in the 1960s and became illegal in 1969. Lead is soft, dull grey and does not ring when tapped; scratch it and it shows silver.

Scottish Water is responsible for the communication pipe up to and including the stop cock at your boundary. The supply pipe from the boundary into your home, and every pipe inside, is the owner's. If we find lead while repairing a burst, we can quote to replace it with modern pipe. For landlords, the Repairing Standard guidance says privately rented homes must not have lead in the drinking water supply from the boundary stopcock to the kitchen tap. More on this in our lead pipes guide.

Burst pipes in flats and empty homes

In a tenement or block of flats, a burst in one flat can flood the flats below within minutes, so shutting off quickly matters. Find your own stop tap now, before you need it, and check that it turns. If it does not, we can fit a new one. If you are going away in winter, keep the heating on low rather than off, or turn off the water and drain the system. Empty flats between tenants are a common source of winter floods. If a pipe has burst under a floor or in a ceiling void, do not wait for the water to show elsewhere. Turn off the supply and call us so we can open the smallest area needed to repair it.

What affects the price

Cost depends on where the pipe is, how many splits there are, the pipe material and how much access is needed through floors, ceilings or lofts. Replacing a lead supply pipe depends on its length and route. All prices are confirmed after a look.

WhatPrice
Repairing a split pipe in an accessible spotprice confirmed after a look at the job
Pipe under a floor or in a ceilingquote on survey
Replacing a lead supply pipe inside the propertyquote on survey
Lagging lofts and exposed pipesquote on survey

No prices are shown on this site. Every job is priced after a look at it, by photo or a visit.

The visit

What happens, step by step

  1. 01

    Isolate and drain

    We confirm the water is off at the right valve and drain the affected pipes so we can work dry.

  2. 02

    Find every split

    Frozen pipes often split in more than one place, so we check the whole run, including lofts, outside walls and under floors.

  3. 03

    Repair or replace the section

    We cut out the damaged length and fit new pipe and fittings that suit the existing system.

  4. 04

    Protect it

    Where a pipe froze, we add insulation or suggest a better route so it does not happen again.

  5. 05

    Refill and test

    We refill the system before relighting the boiler or switching on the immersion, then test for leaks.

FAQ

Burst and frozen pipes: what people ask

Still not sure?

Describe what you can see and you get a plain answer on what it needs.

Start a quote
Can I fix a burst pipe myself?

A pipe repair clamp from a DIY shop can hold a small split for a short time. Scottish Water says any temporary repair should be replaced with a permanent one, ideally by a licensed plumber.

My cold tap has no water and it is freezing. What now?

The pipe is probably frozen. Turn off the stop tap, open the cold tap, and warm the pipe gently with a hot cloth or a hairdryer on low, working from the tap end. Never use a flame.

Is lead pipe my responsibility?

Inside your boundary, yes. Scottish Water is responsible for the communication pipe up to and including the boundary stop cock. If you replace your part, ask Scottish Water to check theirs.

How do I stop pipes freezing again?

Lag pipes in lofts and on outside walls, keep some heat on in cold spells, fix dripping taps and isolate and drain outside taps for the winter.