For one plumber in Glasgow

Own plumberinglasgow.co.uk and this website

  • The domain plumberinglasgow.co.uk
  • A search report: what people in Glasgow type for this trade each month
  • This website, with your own job photos in place of ours
  • Your Google Business Profile set up
  • 2 weeks of Google Ads management free (you only pay Google for the clicks)

Message Matthew at BetterWays, who own the domain.

See the search report for Glasgow

Glasgow and the towns around it

Get a free quote

Boiler repair

Landlord gas safety certificate in Scotland: what you need

Last updated 23 October 2026 · 5 minute read

Short answer: Private landlords in Scotland must have every gas appliance and flue in a let property checked every year by a Gas Safe registered engineer and give the tenant a copy of the Landlord Gas Safety Record. The Repairing Standard also requires a carbon monoxide detector in any space with a carbon fuelled appliance such as a boiler.

Hand turning a thermostatic valve on a white radiator

If you let a flat or house in Glasgow, gas safety is one of the clearest duties you have. It is also one of the easiest to get right, as long as you know what the rules ask for and keep the paperwork in order. This guide is for private landlords letting in the city and the towns around it, from a one bedroom flat in Partick to a family house in East Kilbride.

What the law asks for

Scotland’s private landlords work to the Repairing Standard. The Scottish Government’s guidance on mygov.scot sets out the gas part plainly. Any gas supply or equipment in the property must be:

  • safely installed and maintained by a Gas Safe registered engineer
  • working and in a reasonable condition
  • checked annually by a registered engineer

The tenant must be given a copy of each yearly Landlord Gas Safety Record. People often call this a “gas safety certificate” or a CP12, after the old form number. The record lists every gas appliance and flue that was checked, what the engineer found and any defects.

What the engineer checks

A gas safety check is about safety, not about how well the boiler heats. On a typical Glasgow let with a combi boiler and a gas hob, the engineer will usually:

  • check the boiler, hob and any gas fire are working safely
  • check the flue is sound and clearing fumes properly
  • check there is enough ventilation where it is needed
  • test gas pressure and that safety devices work
  • look for signs of poor combustion, such as staining or a lazy yellow flame

If something is unsafe, the engineer will tell you and the tenant, and may need to turn the appliance off until it is fixed.

ItemSafety checkBoiler service
PurposeConfirms appliances and flues are safeKeeps the boiler clean and working well
Legal for landlordsRequired every yearUsually needed for the warranty
PaperworkLandlord Gas Safety RecordService record or logbook entry
CoversEvery gas appliance and flueThe boiler itself

Many landlords book the safety check and the boiler service on the same visit. That saves arranging access twice.

Carbon monoxide detectors

The Repairing Standard also covers fire and carbon monoxide alarms. mygov.scot says the property must have a carbon monoxide detector in all spaces with a carbon fuelled appliance, such as a heater or boiler. In a tenement flat where the boiler sits in a kitchen press and the flue goes through the back wall, that means a detector in the kitchen as a minimum. If the flat has a gas fire in the living room, that room needs one too.

The engineer can point out where a detector is missing, but it is your job as landlord to fit and maintain it.

Checking the engineer is Gas Safe

Only a Gas Safe registered engineer can legally work on gas in Great Britain. Before anyone touches the boiler, ask to see their Gas Safe ID card. The front shows their photo and licence number. The back lists the types of gas work they are qualified to do, for example domestic boilers or cookers. You can check the number on the Gas Safe Register.

If you use a letting agent, the duty is still yours. The mygov.scot guidance is clear that you are responsible for meeting the standards even if an agent handles the property. Ask the agent for a copy of the record each year and check the date.

Getting access in a tenement

Glasgow tenement lets bring a few practical issues. Tenants may work shifts, buzzers may not work, and parking near the close can be tight. Give tenants proper notice and agree a time window. If the check is due and you cannot get in, keep a record of your attempts.

The check also needs the gas and electricity on. If the flat is empty between tenancies, make sure the meter has credit and the supply has not been capped.

Older flues and boiler positions

Many Glasgow flats have boilers that were fitted when the old back boiler or cylinder came out. Some have flues that run a long way through a press cupboard or out of a light well. The engineer needs to see the full flue route where it can be seen. If a flue runs inside a boxed in void with no way to inspect it, you may be asked to add inspection hatches.

If the engineer finds the boiler is old and parts are hard to get, it can be time to plan a replacement rather than wait for it to fail mid tenancy. Our new boiler page explains the options in Scotland, and our boiler repair page covers common faults.

The rest of the Repairing Standard

Gas is only one part. The same guidance asks for an electrical safety inspection by a registered electrician at least once every five years, a safe water supply, a working toilet, drainage, and hot and cold water to the sink, bath or shower and basin. Since March 2024, Scottish Water’s landlord guidance says privately rented homes must not have lead pipes, fittings or tanks in the drinking water supply from the boundary stopcock to the kitchen tap. Our Repairing Standard plumbing checklist goes through all of these.

A simple yearly routine

  1. Diary the check date a month before the old record runs out.
  2. Book a Gas Safe registered engineer and check their ID on the register.
  3. Give the tenant notice and agree access.
  4. Test the carbon monoxide detector on the visit.
  5. Get the new record and give the tenant a copy.
  6. Fix any defects straight away and keep proof.

We work with landlords across Glasgow, including the West End and Southside where many flats are let. See our West End area page for the local picture.

If you smell gas

If you or your tenant ever smell gas, the advice is the same everywhere in Scotland. Open windows, do not use switches or flames, turn off the gas at the meter if you can, leave the property and call the National Gas Emergency Service on 0800 111 999.

Quick questions

How often does a landlord gas safety check need doing in Scotland?

Every year. The Repairing Standard requires gas appliances in a privately rented home to be checked annually by a Gas Safe registered engineer.

Is a gas safety check the same as a boiler service?

No. A safety check tests that appliances and flues are safe. A service cleans and maintains the boiler. Many landlords book both on one visit.

Does the tenant get a copy?

Yes. The tenant must be given a copy of each yearly Landlord Gas Safety Record.

Do I need a CO detector as well?

Yes. Scottish rules require a carbon monoxide detector in all spaces with a carbon fuelled appliance, such as a boiler or gas fire.

The serviceBoiler repair in Glasgow

Last updated 23 October 2026. Written for homes in Glasgow. Rules can change, so check the linked sources for the latest position.